Other common names: Alloy 690, UNS N06690, W. Nr. 2.4642
Inconel 690 is a high-chromium nickel-based superalloy with excellent water corrosion resistance and stress cracking resistance. The chromium content is about 30%, which is significantly higher than the chromium content in other alloys. Therefore, it is resistant to high-temperature oxidizing gases and oxidizing chemicals. High resistance, and a certain degree of resistance to sulfidation at high temperatures, high nickel content endows the alloy with resistance to stress corrosion cracking in chloride environments and sodium hydroxide solutions. In addition to corrosion resistance.Allloy 690 also has high strength, good metallurgical stability and workability, and is mainly used in heat transfer tubes for steam generators in water reactors (PWR) nuclear power plants.
● Excellent resistance to intergranular corrosion and stress corrosion cracking
● Good resistance to stress corrosion cracking caused by alkali
● Excellent resistance to many corrosive water media or primary and secondary circuits of nuclear reactors
● Good anti-oxidation, anti-sulfur and anti-high temperature gas properties
● Good mechanical properties at room temperature and high temperature, good ductility and weldability
We can provide various forms of Alloy 690 according to your customization, such as follows:
Inconel 690 Bar | Inconel 690 Sheet&Plate |
Inconel 690 Welded Pipe&Tube | Inconel 690 Seamless Pipe&Tube |
Inconel 690 Pipe Fittings | Inconel 690 Fasteners |
Inconel 690 Forgings | Inconel 690 Flanges |
Inconel 690 Coil | Inconel 690 wire |
Chemical Composition | |||||||
C | Cr | Mn | Fe | Ni | Si | S | Cu |
0.05Max | 27.0-31.0 | 0.5Max | 7.0-11.0 | 58.0Min | 0.5Max | 0.015Max | 0.5Max |
Room-Temperature Tensile Properties of Annealeda | |||||||
Form | Size | Yield Strength | Tensile Strength | Elongation | |||
in. | mm | ksi | MPa | ksi | MPa | % | |
Tube, cold drawn | 0.50 x 0.050 | 12.7 x 1.27 | 66.8 | 461 | 110 | 758 | 39 |
0.75 x 0.065 | 19.0 x 1.65 | 55 | 379 | 101.5 | 700 | 46 | |
3.50 x 0.216 | 88.9 x 5.49 | 40.9 | 282 | 94 | 648 | 52 | |
Flat, hot rolled | 0.5 x 2.0 | 13 x 51 | 51 | 352 | 102 | 703 | 46 |
Rod, hot rolled | 2.0 dia. | 51 dia. | 48.5 | 334 | 100 | 690 | 50 |
Rod, hot rolled | 0.62 dia. | 16 dia. | 54 | 372 | 107 | 738 | 44 |
Strip, cold rolled | 0.150 thick | 3.81 | 50.5 | 348 | 105 | 724 | 41 |
Inconel Alloy 690 can be widely used in various environments due to its high temperature resistance, corrosion resistance and high strength. These are just examples:
● PWR nuclear power plant steam generator
● Tail gas reheater for nitric acid production
● Heating coils and tanks for pickling stainless steel with nitric acid and hydrofluoric acid solutions
● Coal gasification plants, burners and pipelines for processing sulfuric acid
Wudenalloy has focused on the production and manufacture of nickel alloys for more than ten years. We are a principal worldwide supplier of corrosion-resistant alloy and other superalloy metals. We have a professional technical team and after-sales service, so we can offer high-quality Hastelloy®, Incoloy®, Inconel®, Monel®, Duplex Stainless Steel and other alloy material. These materials are available in bar, sheet&plate, pipe&tube, flange, forging, and other forms to meet the needs of our customers.
Request a quote now to get the competitive Inconel 690 prices,you can also send emails to sales@wudenalloy.com, Wudenalloy is your trusted supplier of special alloy material.
Chemical Composition | |||||||
C | Cr | Mn | Fe | Ni | Si | S | Cu |
0.05Max | 27.0-31.0 | 0.5Max | 7.0-11.0 | 58.0Min | 0.5Max | 0.015Max | 0.5Max |
Room-Temperature Tensile Properties of Annealeda | |||||||
Form | Size | Yield Strength | Tensile Strength | Elongation | |||
in. | mm | ksi | MPa | ksi | MPa | % | |
Tube, cold drawn | 0.50 x 0.050 | 12.7 x 1.27 | 66.8 | 461 | 110 | 758 | 39 |
0.75 x 0.065 | 19.0 x 1.65 | 55 | 379 | 101.5 | 700 | 46 | |
3.50 x 0.216 | 88.9 x 5.49 | 40.9 | 282 | 94 | 648 | 52 | |
Flat, hot rolled | 0.5 x 2.0 | 13 x 51 | 51 | 352 | 102 | 703 | 46 |
Rod, hot rolled | 2.0 dia. | 51 dia. | 48.5 | 334 | 100 | 690 | 50 |
Rod, hot rolled | 0.62 dia. | 16 dia. | 54 | 372 | 107 | 738 | 44 |
Strip, cold rolled | 0.150 thick | 3.81 | 50.5 | 348 | 105 | 724 | 41 |
Ask a quote for the latest price and one of our team members will respond as soon as possible. Fields marked with * are required.